Septic Systems - Septic Tanks

Miles City Septic Systems and Leachfield Systems

Steadman’s Ace Hardware is your Miles City Septic System, Leach Field and Drain Field headquarters. We now carry the famous ARC Leachfield components in both the 24” and the 36” sizes. We also carry Ace Roto-Mold molded Septic Tanks and Cisterns.

If you’re installing a new septic system in Miles City, or replacing an old septic system in Miles City, come by and see for yourself the many advantages of using ARC Leachfield components and Ace Roto-Mold molded Septic Tanks. No more graveled leach fields, no more heavy equipment necessary for septic tank installation. Save time, labor and parts costs with these septic tanks and leachfield systems.

Ace Roto-Moldiron, copper, pvc and Pex plumbing pipe

Ace Roto-Mold tanks and marine products are well known for high quality rotationally molded products and accessories. Offering everything from concept to design and a wide range of proprietary products, Ace Roto-Mold is a leader in the industrial and agricultural container markets, the marine industry and custom molding.

septic system

ARC Chambers

septic linePlastic leaching chambers have become the preferred choice for leachfield applications over conventional pipe and gravel systems. Their lightweight construction means lower installed costs and less intrusive installations.

ENGINEERED FOR OPTIMAL PERFORMANCE.
• Convenient five-foot lengths are lightweight and easy to handle
• Integral 20-degree articulating joint for all applications
• True corrugated chamber profile provides increased load bearing capabilities
• "Lock and Drop" joint provides a more positive connection during installation and backfill
• Increased plumbing option with Side Port Coupler component which snaps in place to allow side/entry at any joint throughout the trench line
• Diamond plate texture increases slip resistance and/enhances ease of installation

septic drain miles city

 

SEPTIC/CISTERN

Septic Tanks are designed and manufactured to meet wastewater treatment system
standards. Cistern water tanks are designed for bulk storage or collection of potable
water. Manufactured from high-density polyethylene with U.V. inhibitors, tanks are
designed for containment of liquids up to 1.7 specific gravity. Tanks feature deep
ribbing for strength to permit below-ground installations of up to 36” depths. The
1000, 1250, and 1500 gallon double-compartment septic tanks have been tested by
NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards. Consult with the
applicable state, county or local codes for polyethylene septic tank compliance and
installation requirements.

miles city septic tankmiles city septic tank

SEPTIC TANKS

 

PART NO.

 

CAPACITY

 

DESCRIPTION

WEIGHT
Pounds

DIMENSIONS
width x length x height

AST-0300-1

300Gallon

Pump Tank w/ One Access Cover

134

54 x 56

AST-0500-1

500 Gallon

Pump Tank w/ One Access Cover

197

63 x 74

AST-0750-1

750 Gallon

Single Compartment w/ One Access Cover

259

60 x 70 x 60

AST-1000-1

1000 Gallon

Single Compartment w/ Two Access Covers

390

60 x 101 x 60

AST-1000-2

1000 Gallon

Double Compartment w/ Two Access Covers

436

60 x 101 x 60

AST-1250-1

1250 Gallon

Single Compartment w/ Two Access Covers

443

58 x 118 x 72

AST-1250-2

1250 Gallon

Double Compartment w/ Two Access Covers

489

58 x 118 x 72

AST-1500-1

1500 Gallon

Single Compartment w/ Two Access Covers

528

58 x 137 x 72

AST-1500-2

1500 Gallon

Double Compartment w/ Two Access Covers

574

58 x 137 x 72

 

Septic Tank Miles City 

CISTERN TANKS

PART NO.

CAPACITY

DESCRIPTION

WEIGHT
Pounds

DIMENSIONS
width x length x height

AST-0325-1W

325 Gallon

Cistern Tank

134

54 x 56

AST-0525-1W

525 Gallon

Cistern Tank

194

63 x 74

AST-0850-1W

850 Gallon

Cistern Single Compartment

259

60 x 70 x 60

AST-1150-1W

1150 Gallon

Cistern Single Compartment

414

60 x 101 x 60

AST-1450-1W

1450 Gallon

Cistern Single Compartment

473

58 x 118 x 72

AST-1700-1W

1700 Gallon

Cistern Single Compartment

567

58 x 137 x 72

septic tanks miles city

 

About Den Hartog IndustriesDen Hartog Industries

A reflection on the company’s history shows that the same values that founded the company drive the business today.

John J. and Ann Den Hartog purchased J & J Hardware in Hospers, IA, in 1966. For 10 years they enjoyed serving the community but decided that they would like to do even more. On February 9, 1976 they purchased H & S Manufacturing.

Their beginnings with H & S Mfg. consisted of 6 employees and 3 acres of land. They fabricated metal products for hog operations under the Sowjoy brand. Soon after that the couple decided to further expand their business by purchasing VW Dock Company in 1977. VW Dock had been a customer who produced boat docks. It was this transition that helped to lead the company into plastics with the desire to expand into float drums.

In March of 1990 the company entered into plastic manufacturing with the launch of Ace Roto-Mold Manufacturing, rotationally molding storage tanks for agricultural and industrial use as well as float drums. They also began molding custom parts for customers in various industries. The VW Dock portion of the business was sold in 1993 but today the Ace Roto-Mold division continues to produce a whole line of marine products including float drums and dock cushions.septic water tanks

The Den Hartogs continued to expand by adding the Ace Injection Molding facility in 1995. Today the Injection Molding division makes lids and fittings for the Ace Roto-Mold tanks as well as a variety of specialized products for an expanding list of industries.

John J. and Ann always encouraged their children to be involved with the company. In 1998 they were able to pass their growing business to their children, John G. Den Hartog, Barb Truesdell, and Julie Henrich. The second generation of Den Hartogs incorporated H & S Mfg. and Ace Roto-Mold under one name, Den Hartog Industries, Inc. John G. Den Hartog, President, along with Paul Truesdell, Vice President and Jerry Henrich, Corporate Secretary/Treasurer, are leading the company into the future.

In 2000, Den Hartog Industries, Inc. took another step by adding the Blow Molding division, which added a third type of plastic processing to its capabilities. They also launched the Ace Dock Accessories brand in 2004, bringing marine products to the retail market.

Today Den Hartog Industries’ four divisions - Ace Roto-Mold, Blow Molding, Injection Molding and Sowjoy - employ over 300 people in facilities in excess of 365,000 square feet. The company-owned fleet of trucks distributes products nationwide and into Canada. For over 35 years Den Hartog Industries, Inc. has been and always will be committed to serving its customers and community by being “Always At Your Service.”